绿色夜光粉 - 用于纸张、纸板和织物
£5.50

Green glow in the dark powder can give up to 10 hours of glow time!

This pale powder will charge in minutes under UV light to become an incredibly vibrant green.

A water-treated medium. Combine with clear lacquers, resins, varnishes and binders and apply to paper, board, fabric and canvas with a brush or foam roller. Ideal for screen printing.

To create a sprayable medium using this glow powder, combine with our water-based lacquer.

After your project, wipe clean any used equipment and dispose of soiled items in a rubbish bin.

See our full range of glow in the dark powders HERE.

HOW DOES GLOW IN THE DARK WORK?

Anything that glows in the dark is known as phosphorescent or photoluminescent.

Phosphors are chemicals that collect energy from light and store the light energy for some time making them glow for hours afterwards, even when the light source is turned off.

Charge these pigments in light first to make them glow in the dark. The longer they are charged, the longer they will hold glow. Our pigments can glow up to 10 hours!

All our phosphorescent products are made using a high grade phosphor called strontium aluminate. This high strength strontium aluminate releases energy more slowly than some other phosphors, making some of the brightest and longest lasting glow-in-the-dark smart materials on the market.

WHAT CAN I MAKE GLOW IN THE DARK?

You can use SFXC glow in the dark powders and pigments in lots of different ways.  Some glowing examples include:

  • Materials, fabrics, clothing and fashion
  • Halloween products 
  • Paper crafts

WHAT CAN I MIX GLOW IN THE DARK POWDER WITH?

Our glow powders can be mixed with water based mediums like clear resins, varnishes and lacquers.

It is always recommended to add your chosen medium to the glow pigment rather than the pigment to the medium.

Try to avoid making large batches. Make the product as and when you need it to prevent the particles settling. Always remix the coating before reusing.

If possible, please use a viscous (thick) medium.  The glow particles are heavy for their size, and they tend to settle rather quickly.

The medium must also have low acidity. High acidity will damage the glow. You can check this with the manufacturer of the medium you are using.

When mixing the glow pigment in with your chosen medium, please avoid grinding or sheer force as this can damage the crystals and destroy the glow.

HOW MUCH GLOW POWDER SHOULD I USE?

Mixing ratios can be adjusted depending on the application. Please check what is recommended by the manufacturer of the medium you are using.

You can use 6% pigment load, but 10% pigment to 90% medium is usually sufficient. The more pigment you add, the stronger the glow.

For example: If you are mixing the glow in the dark powder with clear resin you can ask the resin supplier how much of the pigment can be added.

WHAT CAN I USE TO MIX MY PIGMENTS AND POWDERS?

We recommend using plastic spatulas and mixing bowls. Please avoid using metal mixing equipment as this could react with the glow pigments.

WHAT SHOULD I USE AS A BACKING COAT?

For the best results, it is always best to apply the finished glow coating to a light or white background or basecoat. A dark background or basecoat will deplete the glow.

Please avoid using coloured mediums when producing a glow in the dark coating. A transparent medium is needed to increase the brightness of the glow. The medium used must also have low acidity.

ARE GLOW IN THE DARK PRODUCTS SAFE? 

If handled with the appropriate equipment, our glow in the dark products are safe to use in creative applications. However, they not cosmetically certified so should not be used for makeup, applied to the skin or put in the mouth. Please dispose of waste or used powder via methods outlined in the safety data sheet linked at the bottom of this page.

HOW SHOULD I APPLY THE POWDER?

Apply using a brush, paint roller or by screen printing.

A thin layer of glow coating will not perform as well as a thick layer. A heavier build (coating thickness) is required to increase the glow time and brightness.
2-3 coats may be needed to increase the glow.

Always ensure the coating is applied to a dry surface and free from debris.

When you are working with the pigment or coating it can be quite hard to see.

Once the coating is dry, use a clear protective top coat for extra durability. 


Please view the TDS and MDS before use.

The information supplied in this post is for guidance only. 

Please fully test our products before print runs, projects, installations and production.

Colours and packaging may vary.